More recently the bottom of an oven
warped upward cracking welds that
hold the sides to the bottom of the
oven and constricting air flow around
the return air baffle.
Pesi Pro series pizza
ovens
This small door is held shut by
screws that constantly fall out
Pesi
Pesi oven
Everyday it makes odd sounds when
metal warps and buckles as it warms up
Pesi Pesi Pesi pesi, pesi pesi pesi pesi pesi pesi pesi p.e.s.i.,p.e.s.i., pesi p.e.s.i.,p.e.s.i., pesi pesi ,pesi,pesi,pesi, pesi
,Pesi Pesi Pesi pesi, pesi pesi pesi pesi pesi pesi pesi p.e.s.i.,p.e.s.i., pesi pesi ,pesi,pesi,pesi, pesi ,Pesi Pesi Pesi pesi,
pesi pesi pesi pesi pesi pesi pesi p.e.s.i.,p.e.s.i., pesi pesi ,pesi,pesi,pesi, pesi , pro series conveyor commercial pizza
oven
Here is the latch that holds the big
door closed. The latch on the bottom
of the photo is the broken one. You
can see that sagging top door has put
strain on the latches  The top latch
looked like it would break first because
the rivets are barely holding, but the
bottom one broke from fatigue. The
bottom latch would come open
spontaneously. After closing it about
15 times it just snapped (so don't plan
on opening this door more than 15
times over the life of your oven, and
have some duct tape around just in
case).
you are home
notice - you can see all the way
through the oven where the door
should be sealed
Pizza Equipment supply international
Pesi Pro series commercial conveyor Pizza oven
Our installer did this
with a screw driver
Pesi Pro series
Pesi Pro series
The craftsmanship on this oven is
embarrassing. my eight year old son saw it
the first time and said, "Dad I thought we
bought a NEW oven", His grandma saw it
(knowing how much I payed and that we
really couldn't afford it) and started crying.
Pesi Pro series pizza
ovens
Pesi Pro series
the bottom door latch has now broken off
Built like a 1970's Soviet Tank ?
It came dented, scratched, late,
missing parts, missing screws, the top
oven doesn't fit over the bottom oven.
pesi does not return calls or E-Mails

It cooks well but how long will it be in
one piece?
Thinking about buying a pesi pro series conveyor oven?

Check out these photos of my brand new oven. It was delivered 4 weeks late. It's missing
parts Pesi won't ship to me(they have now,7 months later, shipped my parts). It is under
warranty but they won't fix it(they now say someone might stop by to look at it)

they started being nice when their owner saw this page
It looks like their welder marked up the
oven so bad they had to use a grinder
to smooth it out
pesi pizza oven pro series
pesi pizza oven pro series
pesi pizza oven pro series
cracked weld
Now the leg on the back right side is
bending. I have a jack stand and 2x4
under it.
Pesi finally sent a tech. After the owner
of pesi saw my web page they decided
to honor their warranty. They replaced
the broken latches, rehung the door,
and cleaned up the cracked corners.
They could not fix the cracked welds or
any of the other problems from bad
design and manufacture.
I can't wait to buy a Bofi XLT oven to
replace this hack job of an oven I am
no longer going to request tech help
from pesi I will repaire the oven my self
until I can replace it.